How To Use Turbocharger Safely

1.Ensure the connecting clamps between turbocharger, pipes and other connecting bolt are not loosen and eliminate the leakage phenomenon. Check whether the return pipe and inlet pipe are not bending, flattening, oil spills. Joints connecting bolts could be no loose. While turbocharger housing is not overheating color and there is no crack.

2.Piping from the air filter to the turbocharger compressor inlet must be intact.

3.Check the oil quality and twisting the oil by hand. Then observed whether there is any mechanical impurity and viscosity changes and check the amount of oil.

4.Turn the crankshaft several times and do pre lubrication before starting.  Idle for about three to five minutes after starting until the water temperature and oil temperature are all normal. Then speed loading.

5.Diesel engine can not running at idle condition for a long time. Monitor turbocharger condition in operation, you should excluded the problem if the turbocharger noise or vibration is abnormal.

6.Control the intake air temperature strictly while pay attention to the out air temperature. Certainly you also should note the exhaust color. When the power of the diesel engine suddenly dropped and also with the exhaust pipe of black smoke, you should stop to checking immediately.

7.Diesel engine reduce the throttle gradually and idle for three to five minutes before stop.